Sealing
Laying the capillaries
Isolating diaphragm CSS • for VEGADIF 65
4.3 Mounting instructions
Suitable seals must be selected for sealing
l
For flange mounting, use a seal with a sufficiently large inner
l
diameter and place the seal centrically; contact with the diaphragm
will cause measurement deviations
When using soft material or PTFE seals, take note of the
l
regulations of the seal manuffacturer, particularly with respect to
torque and settling cycles
Lay in vibration-free areas to avoid additional pressure fluctuations
l
Do not lay close to heating or cooling lines
l
Insulate in case of colder or warmer ambient temperatures
l
Bending radius of the capillaries ≥ 150 mm
l
4 Mounting
9