Mounting Steps With Straining Clamp; Mounting Steps With Screwed Connection - Vega VEGABAR 66 Operating Instructions Manual

VEGABAR 66 • 4 ... 20 mA/HART - climate compensated
4.3

Mounting steps with straining clamp

Fig. 7: Straining clamp
1 Suspension cable
2 Suspension opening
3 Clamping jaws
Mount VEGABAR 66 with straining clamp as follows:
1. Hang the straining clamp on a suitable wall hook
2. Lower VEGABAR 66 to the requested height
3. Slide the clamping jaws upward and push the suspension cable
between them
4. Hold the suspension cable, push the clamping jaws downward
and fix them with a light blow
Removal is carried out in reverse order.
4.4

Mounting steps with screwed connection

Fig. 8: Threaded fitting
1 Suspension cable
2 Seal screw
3 Cone bushing
4 Seal cone
5 Threaded fitting
6 Seal
4 Mounting
1
2
3
1
2
3
4
5
6
15