Product Regulatory Compliance; Product Safety Compliance - Symantec NetBackup 5230 Maintenance Manual

Product regulatory compliance

Product safety compliance

To ensure regulatory compliance, you must adhere to the assembly instructions in
this guide to ensure and maintain compliance with existing product certifications
and approvals. Use only the described, regulated components that are specified in
this guide. Use of other products or components voids the UL listing and other
regulatory approvals of the product. The result is noncompliance with product
regulations in the region(s) in which the product is sold.
Before computer integration make sure that the appliance, power supply, and other
modules have passed EMC testing. This process helps to ensure EMC compliance
with your local regional rules and regulations. The testing is done using a server
board with a microprocessor from the same family (or higher) and operating at the
same (or higher) speed as the microprocessor that is used on this server board.
The final configuration of your appliance product may require additional EMC
compliance testing.
This product is an FCC Class A device. Integration of it into a Class B system does
not result in a Class B device.
See "Product regulatory compliance"
The NetBackup appliance, when correctly integrated per this guide, complies with
the following safety and electromagnetic compatibility (EMC) regulations.
Intended Application - This product was evaluated as Information Technology
Equipment (ITE), which may be installed in offices, schools, computer rooms, and
similar commercial type locations. The suitability of this product for other product
categories and environments, other than an ITE application, may require further
evaluation. Other product categories and environments may include medical,
industrial, telecommunications, NEBS, residential, alarm systems, and test
equipment.
See "Product safety compliance"
The following is a list of product safety compliance norms for different countries:
UL60950 - CSA 60950 (USA / Canada)
■
EN60950 (Europe)
■
Product regulatory and compliance
Product regulatory compliance
on page 63.
on page 63.
63