Equipment Handling Practices; Rack Mount Guidelines - Symantec NetBackup 5230 Maintenance Manual

Equipment handling practices

Rack mount guidelines

Checking equipment room conditions to prevent device problems due to
■
environmental conditions.
Checking the rack cabinet, ensuring a proper environment to prevent device
■
problems.
Checking status LED indicators and supplying troubleshooting procedures.
■
See "Basic maintenance"
To reduce the risk of personal injury or equipment damage:
Conform to the local occupational health and safety requirements when moving
■
or lifting the equipment.
Use mechanical assistance or other suitable assistance when moving or lifting
■
the equipment.
To reduce the weight for easier handling, remove any easily detachable
■
components.
Do not touch fan blades, to prevent injury.
■
Unplug all AC power cord(s) to disconnect AC power.
■
Please recycle all batteries.
■
See "Power and electrical warnings"
The following are rack mount guidelines:
The equipment rack must be anchored to an unmovable support to prevent it
■
from tipping when equipment is extended from it.
You must consider the weight of any other device that is installed in the rack. A
■
crush hazard (serious injury) exists if the rack tilts forward.
The equipment rack must be installed according to the rack manufacturer's
■
instructions.
Install equipment in the rack from the bottom up, with the heaviest equipment
■
at the bottom of the rack.
Extend only one piece of equipment from the rack at a time.
■
Detailed safety and maintenance information
on page 34.
on page 47.
Equipment handling practices
46