Product Safety Information; Netbackup Appliance And Symantec Storage Shelf - Symantec NetBackup 5230 Maintenance Manual

Product safety information

NetBackup appliance and Symantec Storage Shelf

Front and rear panels
■
Bezel
■
Battery replacement
■
Cooling and airflow
■
Laser peripherals or devices
■
This document applies to boards, the chassis, and installed peripherals. To prevent
bodily injury, electrical shock, fire, and equipment damage, read this document
carefully. Observe all warnings and precautions before installing or maintaining the
devices.
The device should be installed and serviced only by technically qualified persons.
Please adhere to the guidelines and the assembly instructions in this guide and in
the appliance and the storage shelf manuals. The guidelines and instructions ensure
and maintain compliance with existing product certifications and approvals. Use
only the described, regulated components that are specified in this guide.
Use of other products or components:
Voids the UL Listing
■
Voids the regulatory approvals
■
May result in noncompliance with product regulations in the region(s) where the
■
product is sold or used
May void the product warranty
■
See "Safety warnings and cautions"
This section provides safety details regarding the removal, installation and
replacement of the NetBackup appliance device, chassis, and components. The
section also provides safety information for the Symantec Storage Shelf device,
components, and peripherals.
You may need the following tools and supplies to work on the appliance and the
storage shelf.
Phillips (cross head) screwdrivers (#1 bit and #2 bit)
■
Detailed safety and maintenance information
Product safety information
on page 44.
43