10Ge Add-In Card Leds; Symantec Storage Shelf Disk Drive Module And System Leds - Symantec NetBackup 5230 Maintenance Manual

10GE add-in card LEDs

Symantec Storage Shelf disk drive module and system
LEDs
8Gb FC HBA data transfer rate LED descriptions (continued)
Table 2-4
8 - Yellow 4 - Green
On On
Flashes Flashes
Flashes alternately
This section provides the physical view, features, and technical specifications for
the 10GE (10 Gigabit Ethernet) card. This card provides two 10GE network ports
for backup.
10GE ports
Figure 2-5
10GE LED indicators
Table 2-5
Type Color
ACT/LINK Green
Green
n/a
GRN=10G n/a
Green
Yellow
See

"Symantec Storage Shelf disk drive module and system LEDs"

The front panel shows two different sets of LEDs:
Two LEDs each per disk drive module, for a total of 32 LEDs
■
2 - Amber Description
On Turn on (before firmware initialization).
Flashes Turn on (after firmware initialization).
Firmware error.
Status Description
Flashes The link is normal and data transfers.
On The link is normal.
Off No link.
Off No link.
On Data transfers at a rate of 10 Gbit/s.
On Data transfers at a rate of 1 Gbit/s.
LED status indicators
10GE add-in card LEDs
on page 20.
20