Replacing The Battery - Cateye PADRONE DIGITAL CC-PA400B Instruction Manual

Replacing the battery

•
PADRONE DIGITAL
When (battery icon) is displayed
on the screen, it is time to replace the
battery. Install a new lithium battery
(CR2032) with the (+) side facing up-
ward.
* After replacing the battery, always press
only the AC button to restart the unit.
The total distance value and the setting
values will be maintained.
•
Speed/Cadence sensor (ISC-12)
If the current speed or cadence display of the
PADRONE DIGITAL starts flashing, it is time to
replace the battery. Install a new lithium battery
(CR2032) so that the (+) side is visible, and then
close the battery cover securely.
* After replacing the battery, always press the
RESET button on the back of the unit and adjust
the position of the sensor relative to the magnet
according to "Mounting the speed/cadence sen-
sor (ISC-12)" (Page 5)
•
Heart rate sensor (HR-12)
If the heart rate display of the PADRONE DIGITAL starts
flashing, it is time to replace the battery. Install a new lithi-
um battery (CR2032) so that the (+) side is visible, and then
close the battery cover securely.
* After replacing the battery, always press the RESET button.
* For detailed explanations on how to use CATEYE sensors such as mounting, or pair-
ing, see the sensor's Online Manual
smartphone app).
C O
I N
Close
CR2032
Open
Close
Open
CR2032
(on our website) or the Quick Start Manual
43
Appendix
Restart operation
AC AC
Press RESET.
Close
CR2032
Open
Press RESET.
(PDF/
Cover,
Introduction
1
2
Using the unit
Using the app
3
4
SET
5
Appendix
3/8