Cateye PADRONE DIGITAL CC-PA400B Instruction Manual page 39

Adding a new sensor
After tapping [Pair to Device], activate the added sensor using the procedure in the
following table.
CATEYE sensors
Speed/Cadence sensor
Heart rate sensor
* With the speed/cadence sensor and heart rate sensor, you can also activate the
sensor by pressing the RESET button.
When Cateye Cycling™ detects the sensor signal, a message is displayed on the
smartphone.
When [Pairing] is tapped, the name of the synchronized sensor is displayed and
pairing is completed.
* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor
name.
3
Tap (Menu) at the top left of the screen, set [Connect] to OFF.
The PADRONE DIGITAL disconnects from the smartphone and the new sensor will
be ready to use.
1
Activating the sensor
Move the magnet through the sensor zone several times.
(Within 3 mm)
Rub both electrode pads with your thumbs.
39
Capabilities with a smartphone
2
Cover,
Introduction
Using the unit
Using the app
Display
ISC
HR
SET
Appendix
1
2
3
4
5
9/10