Operating Instructions Frequently Asked Questions The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
Outline SMART COMPUTER P. 1 OUTLINE TWO MODES SENSORS 2WAY Mirror Mode Sensor Direct Mode - Data from smartphone is sent to the Smart computer where - Allows sensors to be connected directly to the Smart computer you can view it. for measurement.
Before Use SMART COMPUTER P. 2 BEFORE USE 1. Register devices (pairing) Smart computer and Bluetooth Smart Sensors ("smart sensors") must be paired with a smartphone first. STEP 1 - Smartphone operation Device > Device Pairing The smartphone starts searching for devices. STEP 2 - Device operation - Smart computer Press and hold the MODE button for 1 second...
Page 4
SMART COMPUTER P. 3 BEFORE USE 2. Configure Smart computer The following Smart computer-related settings are configured automatically by the smartphone: Time - Adjusted every time the computer connects to the smartphone Unit (km/mile) - Synced with app unit settings Registering smart sensors for use with sensor direct mode - Smart sensors synced with mirror mode smart sensors that are registered in the app.
Operating Instructions SMART COMPUTER P. 4 OPERATING INSTRUCTIONS Sensor Direct Mode Reset Ride data stored in Smart computer * The screen will change after 1 second, but keep holding down the button. Smartphone search screen Connects to smartphone and switches to mirror mode if a smartphone is detected Switch bottom row display...
Upload screen? Only ride data that has not been uploaded to CATEYE Atlas, STRAVA, or Training Peaks is displayed. If you want to upload ride data that you have already uploaded to a different site, do so individually from the...
Page 7
SMART COMPUTER P. 6 FAQ - What should I do if I see a message saying "CC and iPhone have different settings. Which settings do you want to use?" This message appears when the smartphone is not connected to the Smart computer, and units and smart sensor information have been updated on one of the devices.
Page 8
SMART COMPUTER P. 7 FAQ - Why doesn't my smart sensor connect to the Smart computer in sensor direct mode even though it's registered in the app? a. In some cases, smart sensor information may not have been added to Smart computer. Connect the Smart computer to the smartphone, and when a message saying "Which settings do you want to use?"...
Page 9
(3): Group number for pairings where conditions (1) and (2) are identical (maximum of 9) For detailed operating instructions and device installation instructions, refer to the web manual. Please check to see if your smartphone model is compatible before you purchase. Web manual Cateye Cycling Recommended Device/Email Program List...
Need help?
Do you have a question about the Padrone Smart CC-PA500B and is the answer not in the manual?
Questions and answers