Switching Current Function - Cateye PADRONE DIGITAL CC-PA400B Instruction Manual

Switching current function

Pressing MODE switches the current function displayed at the bottom of the screen.
Tm Moving Time
0:00'00" – 99:59'59"
Press the dot section when
mounted on the bracket
Odo Total Distance
0.0 – 99999.9 /
100000 – 999999 km [miles]
*2: Heart rate data will not be displayed unless heart rate sensor is paired.
*3: Regarding the average and maximum values, if only a speed sensor is paired,
the upper display will show the current speed and the lower display will show the
average speed or the maximum speed.
*4: Average values are displayed as .E instead of the measured value when the mov-
ing time exceeds approximately 27 hours. The same applies to the average speed
if the trip distance exceeds 1000 km.
* If the speed, cadence, or heart rate value flashes, the battery of the measuring
sensor has reached the end of its service life.
Starting measurement [Measurement screen]
MODE operation
or
With speed sensor
only (*3)
or
With speed sensor
only (*3)
20
Heart rate (*2)
0 (30) – 299 bpm
Cadence
0 (20) – 299 rpm
Dst Trip Distance
0.00 – 999.99 km [miles]
Dst2 Trip Distance 2
0.00 – 9999.99 /
10000.0 – 99999.9 km [miles]
Average Speed (*4)
0.0 – 105.9 km/h
[0.0 – 65.9 miles]
Average Heart rate (*2,*4)
0 – 299 bpm
Average Cadence (*4)
0 – 299 rpm
Maximum Speed
0.0 (4.0) – 105.9 km/h
[0.0 (3.0) – 65.9 miles]
Maximum Heart rate (*2)
0 (30) – 299 bpm
Maximum Cadence
0 (20) – 299 rpm
Cover,
Introduction
1
2
Using the unit
Using the app
3
2/3
4
SET
5
Appendix