Mounting the speed/cadence sensor (ISC-12)
1
Temporarily attach the sensor to the left chain stay.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sen-
sor arm moves.
(2) Attach the sensor rubber pad to the sensor.
(3) Refer to the illustration and temporarily attach the sensor to the left chain stay
with nylon ties.
Caution!:
Do not fully tighten the nylon ties.
Once the nylon ties are fully tightened they cannot be removed.
Sensor arm
Sensor rubber pad
Nylon tie
6
Mounting the PADRONE DIGITAL
Sensor screw
Left chain stay
Cover,
Introduction
1
4/8
2
Using the unit
Using the app
3
4
SET
5
Appendix