Starting/Stopping Measurement; Data Reset (Saving Summary Data); Power-Saving Function - Cateye PADRONE DIGITAL CC-PA400B Instruction Manual

Starting/stopping measurement

Measurement starts automatically when the
bicycle moves.
During measurement the measurement unit
(km/h or mph) flashes.

Data reset (saving summary data)

Display data other than Dst2 and press MODE for 2 second to reset
all measurement data to 0 (excluding the total distance (Odo) and
trip distance 2 (Dst2) values). At this time, the measurement results
are saved as summary data to the internal memory of the PADRONE
DIGITAL.
* The PADRONE DIGITAL can save up to 30 summary data files.
When the memory is full,
screen and the oldest data is overwritten to save new summary
data.
* Importing summary data from the PADRONE DIGITAL's internal
memory to a smartphone (Cateye Cycling™) clears the internal
memory.
•
Resetting trip distance 2 (Dst2)
Display Dst2 and press MODE for 2 second to reset only Dst2 to 0.

Power-saving function

If the PADRONE DIGITAL does not
receive any signal for 10 minutes,
the power-saving screen is activat-
ed and only the clock is displayed.
If MODE is pressed or a sensor
signal is received while the pow-
er-saving screen is activated, the
PADRONE DIGITAL returns to the
measurement screen.
* When the PADRONE DIGITAL is
left on the power-saving screen
for 1 hour, the display only shows
the measurement unit. When the
PADRONE DIGITAL is in this state,
you can return to the measure-
ment screen by pressing MODE.
Starting measurement [Measurement screen]
(memory alarm) is displayed on the
21
Measurement starts Measurement stops
MODE
(2 seconds)
Power-saving
screen
10 minutes
MODE
Cover,
Introduction
Using the unit
Using the app
SET
1 hour
Sleep
Appendix
1
2
3
3/3
4
5