Troubleshooting; Measurement Does Not Work - Cateye PADRONE DIGITAL CC-PA400B Instruction Manual

Troubleshooting

Measurement does not work

The PADRONE DIGITAL does not switch to the measurement screen.
What should I do?
•
Is flashing on the PADRONE DIGITAL?
The PADRONE DIGITAL is connected to a smartphone.
Set [Connect] to [OFF] in the
close Cateye Cycling™.
Why is the sensor signal not being received?
•
If using a smartphone (Cateye Cycling™), is [Connect] set to [ON] in the
(Menu)?
Set [Connect] to [OFF] or close Cateye Cycling™.
•
Are you using another smartphone application that is connecting to the
Bluetooth® sensor?
The Bluetooth® sensor may be connected to the smartphone.
Bluetooth® sensors are only able to connect with a single device at a time.
Stop using all other apps or change the app settings so that it does not connect
to Bluetooth® sensors.
•
Turn off Bluetooth® on your smartphone, as the sensor may be connected to the
smartphone.
Confirm that the sensor is connected.
It is recommended that Bluetooth® is turned off on your smartphone when the
sensor disconnects easily.
•
Are you also using other wireless devices simultaneously (including other Blue-
tooth® products)?
Stop using the devices simultaneously and confirm that the connection is re-
stored.
•
Press the RESET button on the sensor that cannot connect.
Confirm that the sensor is connected.
(Menu) of the smartphone (Cateye Cycling™) or
44
Cover,
Appendix
Introduction
Using the unit
Using the app
SET
Appendix
1
2
3
4
5
4/8