Changing Sensor Tire Circumference Values - Cateye PADRONE DIGITAL CC-PA400B Instruction Manual

Changing sensor tire circumference values

* You can change the tire circumference by connecting the PADRONE DIGITAL to a
smartphone.
1
On the measurement screen, press MENU to display the
smartphone search screen.
2
Launch Cateye Cycling™, tap
[Reading data from computer...] will be displayed and the smartphone will connect
with the PADRONE DIGITAL. Then follow the procedure below.
1
3
Tap (Menu) at the top left of the screen, set [Connect] to OFF.
The PADRONE DIGITAL disconnects from the smartphone and switches to the
measurement screen to which the setup details have been applied.
PADRONE DIGITAL
MENU
Measurement
screen
Smartphone
40
Capabilities with a smartphone
Smartphone search
screen
(Menu) and set [Connect] to ON.
2
Introduction
Using the unit
Using the app
3
Appendix
Cover,
1
2
3
4
SET
5
10/10