Bluetooth Smart - Cateye PADRONE DIGITAL CC-PA400B Instruction Manual

Appendix
Warning!!! / Caution!
Warning!!!:
•
Do not concentrate on the PADRONE DIGITAL while riding. Always ride safely.
•
Mount the magnet, sensor, and bracket securely, and check them periodically to en-
sure that they are not loose.
•
If a battery is swallowed accidentally, consult a doctor immediately.
Caution!:
•
Do not leave the PADRONE DIGITAL in direct sunlight for a long period of time.
•
Do not disassemble the PADRONE DIGITAL.
•
Do not drop the PADRONE DIGITAL. Doing so may result in malfunction or damage.
•
When pressing the MODE button with the PADRONE DIGITAL installed on the bracket,
press the area around the dot section on the front of the PADRONE DIGITAL.
Pressing other areas strongly may result in malfunction or damage.
•
Always tighten the bracket band dial by hand. Using a tool or other object to tighten the
dial may crush the screw thread.
•
When cleaning the PADRONE DIGITAL and accessories, do not use thinners, benzine,
or alcohol.
•
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to local regulations.
•
The LCD screen may be distorted when viewed through polarized sunglass lenses.
Bluetooth® Smart
Interference occurs in the following places and/or environments, which may result in an
incorrect measurement.
•
Near TVs, PCs, radios, or motors or in cars or trains.
•
Near railroad crossings, along railway tracks, around television transmitting stations
and radar bases, etc.
•
When used together with other wireless devices (including other Bluetooth® products)
or some particular battery lights.
CC-PA400B Frequency Band: 2.4 GHz
ISC-12 Frequency Band: 2.4 GHz
HR-12 Frequency Band: 2.4 GHz
Hereby, CATEYE Co., Ltd. declares that the radio equipment type CC-PA400B / ISC-12 / HR-12 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
cateye.com/doc
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are
not expressly approved by CatEye Co., Ltd. may void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Radiated Power: -5.7 dBm (0.269 mW) at EIPR
Radiated Power: -9.24 dBm
Radiated Power: -0.09 dBm
41
Cover,
Introduction
1
2
Using the unit
Using the app
3
4
SET
5
Appendix
1/8