Setup With The Padrone Digital - Cateye PADRONE DIGITAL CC-PA400B Instruction Manual

Setting up the PADRONE DIGITAL

Setup with the PADRONE DIGITAL

* Check the locations of the buttons on the PADRONE DIGITAL before starting setup.
1
Format (initialize) the unit.
While holding down MENU on the back of the PADRONE DIGITAL, press and release
the AC button.
AC AC MENU MENU
The whole display turns on, and then the smartphone
search screen is displayed.
* All data is deleted and the unit is reset to the factory
default settings.
* If the smartphone search screen is not displayed, the
unit could not be formatted. Try to perform the opera-
tion again.
2
Select the measurement unit.
Press MODE to select "km/h" or "mph".
After selecting a value, press MENU to proceed
to the next step.
Battery case cover
MENU
AC
MODE
Dot section
1 2
MENU MENU AC MENU AC
11
Short press
MODE
Long press
(2 sec.)
MODE
3
MENU MENU MENU
MODE
Cover,
Introduction
SET
km/h ↔ mph
Confirm
MENU
Appendix
1
2
Unit
1/4
3
4
5