Table of Contents
Advertisement
SE-1201 Electrocardiograph User Manual
10.9 Date&Time Setup
Select Date&Time on the System Setup screen, and press Enter to open the Date&Time Setup
window.
NOTE: Please set DATE&TIME correctly when it's the first time you use the
electrocardiograph.
Item
Date&Time
Date Mode
Time Mode
Power Off Time
LCD off Time
Figure 10-10 Date &Time Setup Window
Description
Input the date or the time manually, the time will be displayed on the main
screen, and the date and the time will be printed in the ECG reports.
Choose from: DD-MM-YYYY, MM-DD-YYYY or YYYY-MM-DD
NOTE: Select OK in the Date&Time Setup window or press Enter
to confirm. Then the new setup will become effective.
Choose from: 24 Hours or 12 Hours
Input the power-off time manually.
If you enter 0 Minutes or nothing, this function will not be effective.
NOTE:
1. Power-off time is counted from the time when you last press the
keys on the keyboard.
2. Only when the device is powered by the battery, can the set
automatic power-off time be effective.
Input the LCD off time manually.
If you enter 0 Minutes or nothing, this function will not be effective.
NOTE: LCD Off time is counted from the time when you last press
the keys on the keyboard.
- 101 -
System Setup
Advertisement
Table of Contents
