Table of Contents
Advertisement
SE-1201 Electrocardiograph User Manual
M
Gain
N
Speed
O
Freeze
P
Patient
Q
ECG waveform
R
S
Order
T
File
U
Setup
Gain: 2.5 mm/mV, 5 mm/mV, 10 mm/mV, 20 mm/mV, 10/5
mm/mV or AGC
NOTE: This setup modified on the main screen is only
effective for the current patient.
In the manual mode, you can set Speed to 5mm/s, 6.25mm/s,
10mm/s, 12.5mm/s, 25mm/s or 50mm/s. In the auto and
rhythm modes, only 25mm/s and 50mm/s are available. In the
R-R analysis mode, only 25mm/s is available.
NOTE: This setup modified on the main screen is only
effective for the current patient.
Freezing ECG waves. For details, please refer to Section 6.3,
"Freezing ECG Waves".
Press the function key F1 below Patient to open the Patient
Information window. For details, please refer to Chapter 5,
"Entering Patient Information".
Display ECG waveform
Press to return to the main screen1.
Press to open the Order Manager screen. For details, please
refer to Chapter 8 "Managing Orders".
Press to open the File Manager screen. For details, please refer
to Chapter 9 "Managing Files".
Press to open the System Setup screen. For details, please refer
to Chapter 10 "System Setup".
- 36 -
Basic Operation Guidance
Advertisement
Table of Contents
