Table of Contents
Advertisement
SE-1201 Electrocardiograph User Manual
On the File Manager screen, files can be printed, transmitted, exported, displayed, edited
searched or deleted. SE-1201 can accommodate 200 files.
If there is no file on the File Manager screen, the following dialog box will pop up when you
press function keys.
1. When files are being printed, transmitted, deleted or exported, you can not turn off
the electrocardiograph.
2. Do not cut off the mains supply directly when no battery is installed in the device, or
else, the stored data may be lost.
9.1 Transmitting Files
Make configuration in accordance with Section 7.1 "Transmitting ECG Data" before you transmit
files.
Pressing Trans All on the File Manager screen1 can transmit all the files from the
electrocardiograph.
Or, you select a file on the File Manager screen1, and then press Select to display the File
Manager screen2. Select Trans on the File Manager screen2, and then press Enter to transmit
the selected file from the electrocardiograph.
NOTE: If you select Delete After Trans. Or Export in the File Setup window, the files
will be deleted from the File Manager screen after they are transferred.
9.2 Exporting Files
1. Connect the U disk or SD card recommended by the manufacturer to the electrocardiograph.
2. Select DAT/SCP/FDA-XML/PDF from the File Format list box in the File Setup window.
3. Select Export All on the File Manager screen1 to export all the files to the directory of
ECGDATA\ECG-X\Export\Export Date and Time of the U disk or SD card.
4. Or select a file on the File Manager screen1, and then press Select to display the File
Manager screen2. Select Export on the File Manager screen2 to export the selected file to
the directory of ECGDATA\ECG-X\Export\Export Date and Time of the U disk or SD card.
CAUTION
- 77 -
Managing Files
Advertisement
Table of Contents
