Table of Contents
Advertisement
SE-1201 Electrocardiograph User Manual
10.6 Transmission Setup
NOTE:
1. To transmit ECG data in DAT format to the PC, the Smart ECG Viewer software of the
manufacturer must be installed in the PC. You should log into the Smart ECG Viewer
software before transmission.
2. To transmit ECG data in SCP/FDA-XML/PDF format to the PC, the FTP receiving
software must be installed in the PC. You should log into the FTP receiving software
before transmission.
Select Transmission on the System Setup screen, and press Enter to open the Transmission
Setup window.
Item
Device No.
Auto Transmission
Figure 10-7 Transmission Setup Window
Description
If you input 0 in the Device No. textbox, after you save data to the U disk
or
SD
card,
ECGDATA\ECG-0\Store\Examination Date of the U disk or SD card;
after you export files from the electrocardiograph to the U disk or SD
card,
the
files
ECGDATA\ECG-0\Export\Export Date and Time of the U disk or SD
card.
Choose from: On or Off
Select On, ECG data will be transmitted automatically after an ECG
report is printed out in the auto or rhythm mode; in the off mode, 10s
ECG data sampled before pressing the PRINT/STOP key can be saved
and transmitted, but can not be printed.
the
data
will
will
be
- 97 -
System Setup
be
in
the
directory
in
the
directory
of
of
Advertisement
Table of Contents
