Table of Contents
Advertisement
SE-1201 Electrocardiograph User Manual
1) Double-click on the shortcut icon
2) Click on the System Setting button to open the System Setting screen, and then click on
the Device tab.
3) Select SE Serial Machine from the Sampling Device drop-down list in the Device
window.
4) After setup, click on the OK button to confirm.
Connect USB socket 3 of the electrocardiograph to the USB socket of the PC by using the
2.
high-speed USB cable.
For details, please contact the manufacturer or the local distributor.
3. Start the real-time transmission
The electrocardiograph transmits to the PC the ECG signals acquired from the patient.
Acquisition and transmission are simultaneous. The ECG signals are displayed on the PC
monitor and eventually analyzed. For more details, refer to the user manual of the PC ECG
software.
In the real-time transmission, the function of the electrocardiograph is the same as that of the
ECG sampling box.
on the desktop to start up the PC ECG software.
- 70 -
Transmitting ECG Data
Advertisement
Table of Contents
