Table of Contents
Advertisement
SE-1201 Electrocardiograph User Manual
3.3.2.2 Attaching the Chest Electrodes
Chest Electrode Connection:
1) Ensure that the electrodes are clean;
2) Clean the electrode area on the chest surface with 75% alcohol;
3) Daub the round area of 25mm in diameter on each electrode site with gel evenly;
4) Place a small amount of gel on the brim of the chest electrode's metal cup;
5) Place the electrode on the chest electrode site and squeeze the suction bulb.
Unclench it and the electrode is adsorbed on the chest;
6) Attach all chest electrodes in the same way.
NOTE: Long-time measurement with a strong negative pressure on the suction
bulb may cause reddening of the skin. When using the electrode on kids
or patients with delicate skin, squeeze the suction bulb lightly.
Limb Electrode Connection:
1) Ensure that the electrodes are clean;
2) Clean the electrode area which is a short distance
3) Daub the electrode area on the limb with gel evenly;
4) Place a small amount of gel on the metal part of the
5) Connect the electrode to the limb, and make sure that
6)
Suction Bulb
Metal Cup
Chest Electrode
above the ankle or the wrist with 75% alcohol;
limb electrode clamp;
the metal part is placed on the electrode area above
the ankle or the wrist;
Attach all limb electrodes in the same way.
- 24 -
Operation Preparations
Connecting to a Lead Wire
Advertisement
Table of Contents
