Table of Contents
Advertisement
SE-1201 Electrocardiograph User Manual
Name
A
Function Key
B
Gender Key
C
Age Group Key
D
Delete
E
Enter
F
Arrow Keys
G
REVIEW
H
PRINT/STOP
I
1mV/COPY
J
RESET
K
FEED Paper
Press to select menu functions on the screen.
Press to select the gender for the patient when Gender is
selected in the Patient Information Setup window.
Press to select the age group on the main screen when you set
Age to Age Group in the Patient Information Setup window.
Press to erase characters.
Press to confirm operation.
Moving the cursor (Up, Down, Left, Right).
In the manual mode, press the Left or Right arrow to switch
among the lead groups.
Pressing Shift + Up/Down can turn pages on the Order
Manager screen and the File Manager screen.
10s ECG data sampled before pressing the REVIEW key will
be printed out in the AUTO mode.
NOTE: The system will not respond to the REVIEW key
unless 10s data has been collected on the main screen.
Press to start or stop printing reports
In the manual mode, pressing the 1mV/COPY key can insert a
1mV calibration mark in the printing course.
In the auto or rhythm mode, pressing the 1mV/COPY key can
print the ECG report which was printed out last time.
Press to reset the baseline.
NOTE: A large polarization voltage may cause baseline
drift. On the main screen, pressing the RESET key can
decrease the polarization voltage and draw the baseline to
zero quickly.
When the main screen, the freezing screen, the File Manager
screen1/2 or the preview screen is displayed, if Paper Marker
is set to Yes, you can press the FEED key to advance the
recorder paper to the next black marker; if Paper Marker is set
to No, you can press the FEED key to advance the paper for
2.5cm. Press the FEED key again to stop advancing the paper.
- 11 -
Explanation
Introduction
Advertisement
Table of Contents
