SE-1200 Series Electrocardiograph User Manual
10.6 Transmission Setup
NOTE:
1. To transmit ECG data to the PC in DAT format, the ECG data management software
(DMS) of EDAN must be installed in the PC.. You should log into the DMS before
transmission.
2. To transmit ECG data to the PC in DICOM/SCP/FDA-XML/PDF format, the FTP
receiving software must be installed in the PC. You should log into the FTP receiving
software before transmission.
Select Transmission on the System Setup screen, and press Enter to open the Transmission
Setup window.
10.6.1 Basic Setup
Before WIFI is configured, the Transmission Setup is as follows
When WIFI is configured, the Transmission Setup is as follows
Figure 10-7 Transmission Setup Window
- 94 -
System Setup