Setting Eom Signal; Timing Chart - ITech IT5101 User Manual



4. Press [Enter] to confirmed.

3.18 Setting EOM Signal

1. Press [Menu] and enter menu setting.
2. Press [Sys Config] and enter to system configuration page.
3. Press Up/Down dicrection keys and select "EOM Mode", set the EOM output
method.
When EOM Mode set to "Pulse" output mode, it need to set pulse time. The unit
is S. Otherwise, set to Hold mode, there is not this item setting.

3.19 Timing Chart

ERR output (ASync)
Contact state
________
ERR (Async)
ASync: Asynchronous with EOM Output
Sync: Synchronized with EOM Output
Copyright© Itech
Contact
Electronics Co., Ltd.
Function and Features
Open
36