ITech IT5101 User Manual page 25

SN
Cal Info
MAC Address
Sys Set
Beeper
Brightness
Data
Time
Config
Filter Freq
Alarm Set
Err Out
EOM Mode
Pulse Time
Comm Set
Type B
USB
Connect
GPIB Address
IP Mode
Port Set
LAN IP Address
IP Mask
Gate Way
Reset
SetReset
SysReset
Press [Menu] key. The system, by default, displays System Information; press
the corresponding soft key of [Sys Set] to enter System Parameter Setting
page for setting the configurations below. (The schematic diagram takes IT5101
Model as an example)
Copyright© Itech
Series Number
Calibration information
Network hardware address
System Setting
Setting the buzzer function
Setting the screen brightness.
Setting system date: Year/Month/Day
Setting system time: Hour/Minute/Second
System Configuration
Setting the filter frequency
Setting the mode of alarm
Setting Err output mode
Setting th EOM signal
Setting the pulse time. It is effective when
"EOM Mode" set to "Pulse"
Communication configuration
Select the USB communication interface.
The address can be set within 1-31
IP mode：MANU/DHCP
Setting port
Setting IP address
Setting IP mask
Setting gateway
Reset system
Reset the configuration of system
Reset all of system configuration
Electronics Co., Ltd.
Function and Features
17