Table of Contents
Advertisement
MGC WebCommander User's Guide
MGC Web Server and the MCU field is set to Auto in the Conference
template, the system selects the MCU to run the conference according to
the order in which they are defined in the MCU table or in the MCU list
assigned to the logged in user. If no MCU is connected to the MGC Web
Server, an appropriate error message is displayed.
If the conference was started successfully on the MCU and the Meet Me
Per Conference option is set for the conference, the system displays the
dial-in number that should be used by the conference participants, for
ISDN/T1-CAS and H.323 participants. Prior to the conference start a
dialog box appears listing the dial-in numbers to be used by ISDN/T1-
CAS and H.323 participants.
The ISDN phone number is based on the dial-in phone numbers range
defined for the MCU. If the PBX truncates the first digits these digits
have to be added to the number communicated to the conference
participants. The H.323 dialing string is composed of the H.323 Network
Service Prefix and the conference Numeric ID. The conference Numeric
ID is listed separately.
4-13
Advertisement
Table of Contents
