Table of Contents
Advertisement
Table 4-3: Participant Dialog Page parameters
Option
Connection (con't)
E-mail
Audio only
H323
IP Address
Alias Name
MGC WebCommander User's Guide
Description
•
Dial-out - The MCU calls the participant at
conference time. You must enter the participant's
phone number in the Participant Number box, or
IP address/Alias when defining the participant.
If the Manual Dial-Out option is selected for the
conference in the Conference template, the
meeting organizer/operator must initiate the call
to the participant.
•
Direct - The participants are connected directly
to the MCU through a leased line. No dialing is
required for direct connections. This option is not
available for IP participants.
This option is relevant to ISDN participants only.
Enter the E-mail address of the participant if you
want to send him/her an E-mail notification when
scheduling a meeting. The E-mail includes the
conference start date and time, conference entry
password, chairperson password (Audio Only
conferences) and the conference dial-in number (if
required).
Select this check box if the participant is a Voice
participant (his/her connection device is a telephone)
or no video will be used.
When selecting T1-CAS, the Audio only check box is
automatically selected and greyed out.
Select the H323 option for an H.323 participant. The
IP Address and Alias Name boxes are enabled.
In a dial-out connection, enter the participant IP
address or alias of the endpoint or the PC to which
the endpoint is connected that is called by the MCU.
In a dial-in connection, enter the participant IP
address and/or alias that is used to identify and
route the participant to the appropriate conference.
Enter the endpoint alias in E.164 format (only
numerals).
4-21
Advertisement
Table of Contents
