Table of Contents
Advertisement
Chapter 4 - New Meeting Window
4-22
Table 4-3: Participant Dialog Page parameters
Option
SIP
SIP Address
ISDN/Phone
T1-CAS
Participant number
VIP
Description
Select the SIP option if the participant is an SIP
participant/SIP phone participant.
sip: [user name]@[domain].
URI adheres to URI rules: no spaces or special
characters such as commas, quotation marks,
inverted tags and so forth either in the user name or
in the domain part.
[To compare to H.323, which uses the endpoint location for
identifying the participant, in SIP participants can change
locations but still be addressed as long as they
continuously refresh their registrations with the proxy. The
proxy forwards Invitees to their current location.
Select the ISDN/Phone option if the participant is an
ISDN participant or a telephone participant.
Select the T1-CAS option if the Audio Only
participant connects via a T1-CAS line and the MCU
is configured to support T1-CAS lines in Audio Only
and Video conferences.
Type the participant's phone number (including
country and area codes when required) to be dialed
by the MCU when connecting the participant to the
conference. For video calls using several channels,
add a semicolon (;) between numbers when several
numbers are to be assigned to a participant (one per
channel). For example, 9251222; 9251223; ....;xxxx
(in aggregation mode).
In order to support Bonding with specific switches
you many need to add the pound key (#) symbol at
the end of the dial-out number sequence. For
example 9251222#.
Select this check box to assign the VIP status to a
participant. A participant designated as VIP will be
displayed with a special VIP icon to indicate
participants that.
Note that the SIP
Advertisement
Table of Contents
