Connecting Dial-Out Participants - Polycom WEBCOMMANDER 8 User Manual

Connecting Dial-out Participants

When the Dial-out Manually option is selected for the conference, the
operator has to initiate the connection from the MCU to the dial-out
participant. For further information on the connectivity options see
"Participant Connection to the Conference" on page 7-7.
To connect the participant:
In the Status column, click the Connection button.
•
Alternatively, point to the participant's arrow, and then click Connect
Party.
During the connection process, the Connection button is animated.
When the connection is established, the participant's status changes to
Connected and the Connection button changes accordingly:
MGC WebCommander User's Guide
5-39