Polycom Visual Concert Pc - Polycom WEBCOMMANDER 8 User Manual

Polycom network card user manual
Hide thumbs Also See for WEBCOMMANDER 8:
Table of Contents

Advertisement

MGC WebCommander User's Guide
7-32
4CIF
Encryption
FECC (H.320 and H.323)
The H.239 standard is enabled/disabled in the system.cfg file. For For more
information see the MGC Manager documentation
The H.239 protocol is not supported by the SIP standard
Limitations
In Continuous Presence conferences - Software and Quad View modes
are disabled
H.239 is not supported in:
— ISDN (H.320) calls
— H.320 Cascading conferences
— MIH Cascading conferences
— Simple cascading conferences
— T.120 conferences
— Double Gateway configurations
Using this feature the People video stream and the Content video stream are
treated differently by the endpoints.

Polycom Visual Concert PC

Polycom Visual Concert enables the sending of two separate video streams:
video and data. Typically, the video stream is transmitted in the standard
H.263 resolution in high frame rate while the data video stream is transmitted
in a higher resolution but lower frame rate.
Polycom Visual Concert can be enabled for Video Switching conferences for
both H.320 and H.323 participants.
The Visual Concert feature is available with Polycom's ViewStation PC
endpoints. In order to activate this option, the Polycom Visual Concert PC
application must be installed on the same computer deployed as the data
source. This computer is connected via the LAN to the ViewStation endpoint
that will broadcast the data to all conference participants. The data stream
may be received by both ViewStation and View Station FX endpoints.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgc webcommander 8.0

Table of Contents