Polycom DOC2237A Hardware Installation Manual page 58

Chapter 2 - Hardware Installation
2-38
Table 2-2: IP Configuration Options
Option
IP Address
Subnet Mask
Default Gateway
11. Click OK.
12. Exit the MGC Manager and switch OFF the MCU.
13. Disconnect the MCU from the cross-over cable.
14. Connect the MCU to your site's network.
15. Switch ON the MCU.
a. Right-click the MCU icon, and then click Properties.
Description
The system displays the currently defined IP
address. Enter the IP address allocated to the
MCU by the network administrator.
Enter the Subnet Mask of the MCU.
Enter the IP Address of the default gateway/
router.