Video Module (Standard); Video Module Architecture - Polycom DOC2237A Hardware Installation Manual

Polycom video conference bridge hardware & installation guide
Table of Contents

Advertisement

Video Module (Standard)

The Video Module performs video processing and Transcoding. The module
supports the ITU-T H.261 and H.263 standards ("Video Codec for
Audiovisual Services at Px64 Kbps").
The Video Module supports multiple sites. When using the Continuous
Presence mode of operation, the Video Module combines multiple video
sources to build a video layout image. Depending on the number of
conference participants and the quality of the screen, the MGC supports video
layout configurations of 2, 4, 9, 1+5 and others.
The Video Module performs Transcoding between different compressed
video bit rates to support multiple bit rates on the same conference. The
module performs Transcoding from QCIF to CIF resolution to support
multiple resolution rates in the same conference.

Video Module Architecture

Figure 4-29 shows the architecture for the Video Module.
Video
Video Hardware
Memory
Front
Panel
LEDs
Watch
Dog
HDLC Interface
Figure 4-31: Video Module
MGC Hardware and Installation Manual
TDM Interface
Video
CODEC
Card
Manager
x 6
Memory
4-59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgc 50Mgc 100

Table of Contents