Mux+ Resource Report - Polycom DOC2237A Hardware Installation Manual

Polycom video conference bridge hardware & installation guide
Table of Contents

Advertisement

Chapter 4 - Hardware Description
4-52

MUX+ Resource Report

MGC-50/100 Resource Report
The Resources Report, displays the total number of MUX+ port resources
available according to the card type, line rate and encryption.
In the example shown here, the system lists the total number of ports
available with the MUX+20 card for both non-encrypted and encrypted
participants, based on their connection line rates. At a line rate of 128 Kbps,
up to 36 non-encrypted and 18 encrypted participants can connect to
conferences. At a line rate of 384 Kbps, 20 non-encrypted and 10 encrypted
participants can connect to conferences running on the MCU.
IP/SIP
In the IP/SIP section of the Resources Report both non-encrypted and
encrypted participants are grouped together.
For example, if one encrypted and one non-encrypted participants using a line
rate of 128 Kbps attend a conference, the resource report displays the sum of
the used resources of both participants together. In this case the non-
encrypted participant is allocated 1 port and the encrypted participant 2 ports,
totalling 3 ports.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgc 50Mgc 100

Table of Contents