Installing and Connecting a
WLAN-Security Switch
Unpacking a WSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Installing a WSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Powering On a WSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Note.
Before installing a WSS, you might need to generate a network plan with WLAN
Management Software . (See
Unpacking a WSS
The shipping carton for a WSS contains the following items:
•
One WSS, with one power supply (or two power supplies, if you ordered the 2361)
•
For some countries, one country-specific power cord
•
One serial cable for connection to the management console (not included with the 2350)
•
Two rack-mount brackets (not applicable to the 2350)
•
Four adhesive rubber feet
•
One documentation pack that includes this guide
•
One set of release notes
Figure 9
shows the contents of the shipping carton for a 2370 switch. The contents of a 2360 or 2380 shipping carton are
similar. The 2350 carton contains the switch, a power supply and cord, rubber feet, a documentation pack, and release
notes.
WLAN-Security Switch 2300 Series Installation and Basic Configuration Guide
"WLAN Management Software Network Plan" on page
37
39.)