Nortel 2350 Installation And Basic Configuration Manual page 84

84 Configuring a 2370, 2360, or 2380 Switch for Basic Service
To verify the changes, use the following commands:
show timezone
show summertime
show timedate
show ntp
The following commands configure the timezone as PST (Pacific Standard Time) with an offset of -8 hours from UTC
and enable the standard summertime offset and name it PDT (Pacific Daylight Time). Additional commands configure
an NTP server and enable the WSS's NTP client.
2370# set timezone PST -8
success: change accepted.
2370# set summertime PDT
success: change accepted.
2370# set ntp server 192.168.1.10
2370# set ntp enable
success: NTP Client enabled
The following commands display time and date parameters and the current time and date:
2370# show timezone
Timezone is set to 'PST', offset from UTC is -8:0 hours.
2370# show summertime
Summertime is enabled, and set to 'PDT'.
Start : Sun Apr 04 2004, 02:00:00
End : Sun Oct 31 2004, 02:00:00
Offset : 60 minutes
Recurring : yes, starting at 2:00 am of first Sunday of April
2370# show ntp
NTP client: enabled
Current update-interval: 20(secs)
Current time: Fri Feb 06 2004, 12:02:57
Timezone is set to 'PST', offset from UTC is -8:0 hours.
Summertime is enabled.
Last NTP update: Fri Feb 06 2004, 12:02:46
NTP Server
---------------------------------------------------
192.168.1.5
2370# show timedate
Fri Feb 06 2004, 12:03:04 PST
320656-A
and ending at 2:00 am on last Sunday of October.
Peer state
SYSPEER
Local State
SYNCED