Nortel 2350 Installation And Basic Configuration Manual page 147

Wlan-security switch 2300 series
Hide thumbs Also See for 2350:
Table of Contents

Advertisement

2370# show interface
VLAN Name
---- --------------- --------------- --------------- ------- ----- ------------
1 default
2370# show system
===============================================================================
Product Name:
System Name:
System Countrycode: US
System Location:
System Contact:
System IP:
System MAC:
===============================================================================
Boot Time:
Uptime:
===============================================================================
Fan status: fan1 OK
Temperature: temp1 ok
PSU Status: Power Supply DC ok
Memory:
144.06/465.03 (31%)
Total Power Over Ethernet : 6.000
===============================================================================
5
Configure a default route that uses the local access router at 10.10.20.1 as its gateway, and indicate that
the gateway is one router hop away from the 2350. (One hop means the 2350 and the local access router
are in the same IP subnet.)
2370# set ip route default 10.10.20.1 1
success: change accepted.
2370# show ip route
2370# show ip route
Router table for IPv4
Destination/Mask
Proto
_________________ _______ ______ _______ _______________ _______________
0.0.0.0/ 0 Static
10.10.20.15/24 IP
10.10.20.15/32 IP
10.10.20.255/32 IP
224.0.0.0/ 4 IP
Note.
example are automatically added when you configure the corresponding IP
interface. The 224.0.0.0 route is for the IGMP snooping feature and is also added
automatically.
6
Set the timezone to Pacific Standard Time, enable Daylight Savings Time, and set the date and time on
the 2350's onboard clock.
2370# set timezone PST -8
success: change accepted.
WLAN—Security Switch 2300 Series Installation and Basic Configuration Guide
Address
Mask
10.10.20.15
255.255.0.0
2350
2350
10.10.20.15
00:0B:0E:00:04:0C
2004-12-15 14:18:41
0 days 00:05:07
Metric NH-Type Gateway
1 Router 10.10.20.1
0 Direct
0 Local
0 Local
0 Local
The 0.0.0.0 route is the default route. The 10.10.20.x routes in this
Configuring a 2350 Switch for a Branch Office 147
Enabled State RIB
YES
Up
VLAN:Interface
vlan:1:ip
vlan:1:ip
vlan:1:ip:10.10.20.15/24
vlan:1:ip:10.10.20.15/24
MULTICAST
ipv4

Advertisement

Table of Contents
loading

This manual is also suitable for:

2370236023802361

Table of Contents