Extron electronics AXI 22 AT User Manual page 30

6. Click the
Device Config
7. In the
Rename Device
spaces are allowed in the name. Names should be significant identifiers. For example,
enter
AXI44-ConfRm1
8. Click ( ). A confirmation prompt opens.
Apply 3
Figure 26. Device Config Dialog, Rename Device
9. Click ( ) to confirm the new name, then close the
4
Yes
box. The new name is written to the AXI. Repeat as necessary for all devices.
NOTE: The device name assigned in Dante Controller also applies to the device
name recognized in DSP Configurator Software.
Figure 27. Rename Device Confirmation Dialog Box
tab (see figure 26, ) to open the
1
panel, enter the new name of the device in the text field. No
( ).
2
AXI 22 AT and AXI 44 AT • Dante Controller
page.
Device Config
dialog
Device Configuration
24