Extron electronics AXI 22 AT User Manual page 32

To rename an AXI Receiver:
1. From the menu on the
Device
on the keyboard. The
<Ctrl+D>
2. From the
(Select a Dante Device...)
desired AXI device (see figure 29,
3. On the screen, select the
Device View
4. Click the name of the Receiver to be renamed. The name becomes a text field with a
cursor ( ).
3
5. Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for
6.
Press on the keyboard or click another channel name to confirm the new
<Enter>
name.
7. Repeat steps 4 through 6 to rename additional Receiver channels.
8. When finished renaming Receivers, close the
Figure 29. Renaming a Receiver
Renaming a Transmitter
The default names shown in the
connected Dante device (see
are labeled
Mic/Line In 1
signal onto the Dante network.
TIP: It is essential that Dante Transmitter channels be named before audio
subscriptions are established. Existing subscriptions are removed when Transmitter
channels are renamed.
screen, select
Network View
dialog box opens.
Device View
drop-down menu, select the name of the
)
1
tab (
Receive
, , and (period).
@ = .
Device View
Dante Transmitters
figure 28, on the previous page). The AXI Transmitters
2
through because the mic/line inputs transmit
Mic/Line In 4
AXI 22 AT and AXI 44 AT • Dante Controller
, or press
Device View
).
2
dialog box.
column are extracted from the
26