Extron electronics AXI 22 AT User Manual page 36

Creating Subscriptions Between Transmitters and Receivers
1. Ensure the host PC and AXI are connected to the same network.
2. From the start menu select:
All Programs > Audinate > Dante Controller > Dante Controller
The
Dante Controller - Network View
Dante Controller auto-discovers Dante devices on the network and advertises itself to
allow other Dante-enabled devices to communicate with it. Transmitters connect to
receivers using the connection matrix.
Figure 33. Routing Tab of Network View Screen
3. To show the transmitters of a Dante device, click the
in the
Dante Transmitters
+
The converts to a sign when the device expands.
–
4. To show the receivers of a Dante device, click the
the
Dante Receivers
5. Click the intersection of the desired transmitter and receiver (
Example:
AXI44-ConfRm1 Mic/LineIn-1
.
Exp_IN-01
A check mark at the intersection indicates the subscription is made. A check mark also
appears next to the receiver channel.
screen opens.
panel, such as
AXI44-ConfRm1
+
panel, such as
DMP128Plus-MainRack
is routed to the
AXI 22 AT and AXI 44 AT • Dante Controller
+
box next to the desired device
(see figure 33,
1
box next to the desired device in
( ).
2
).
3
DMP128Plus-MainRack
above).
30