Selecting The Service Routine S.02 - Sirona orthophos plus Installation Instructions Manual

Sirona Dental Systems GmbH

13 Selecting the Service Routine S.02

1
3.
2 - 4 - 1
1.
Memory
X-RAY
S.
02
00
kV
mA
8.
S23
6.
AES
• Following the self-adjustment routine of the unit, per-
form Service Routine S.02 on the Multitimer (no rota-
tional movements, no movement of the cassette car-
riage ).
1. Press Memory button. (LED above button flashes).
2. Then press the AES key until the digital displays disap-
pear (approx. 4s) .
3. Within 3s:
Press the patient symbol keys in the sequence 2 – 4 –
1 The service mode is now selected..
• If the sequence is not observed when selecting the
service routine, if a wrong key is pressed or the time
(see 3.) is exceeded, the system switches automatical-
ly to normal mode.
4. Press AES key.
Service routine S.0 I appears on the digital display.
5. With the "+" button (program selection) select Service
Routine S.02.
6. Press AES key.
00 is shown in the kV display.
60 82 064 D 3297
D 3297.031.01.04.02
X-RAY
kV
2
4
mA
8.
S23
AES
2.
5.
S. 02
02
kV
0I
mA
8. AES
X-RAY
S.
0I
kV
mA
4.
AES
X-RAY
7.
8.
S23
7. Actuate the "+" (kV/mA) button several times, until
Service 02 is shown in the display.
This step must be performed for safety reasons during
all service routines which could entail danger.
i
NOTE
The service code correspoinds to the number of the service
routine selected
e.g.:
Service Routine S.02
Service Routine S.26
• Test step 01 is shown in the mA display.
8. Press the AES key again. The digital displays begin
flashing.
9. With the "+" (program selection) button, select a tradia-
tion time of 3.2 s.
10. With the "+" (kV/mA) button, select the largest possible
kV/mA combination.
Observe the warmup time. When the flashing LED
above the Return button goes out, the unit is ready for
radiation release.
13 Selecting the Service Routine S.02
8.
S23
X-RAY
3.20
90
kV
e.g.
.
12
mA
8.
S23
→
Service-Code 02
→
Service-Code 26
9.
10.
25