Before Installing The Ne1032T - Lenovo ThinkSystem NE1032T Installation Manual

Before Installing the NE1032T

34
NE1032T Installation Guide
Attention: Product information is required in order to register your NE1032T,
update its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the
NE1032T is installed. To prevent the need to remove the switch in order to read
required product information, locate and record the information shown on Table
prior to installation.
Figure 6 contains examples of product information labels.
Figure 6. Sample product labels from the switch
Note: These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the front, rear, and/or bottom of the NE1032T contain
the Machine Type‐Model (MTM) number, serial number, part number of the
switch. These labels also include the Media Access Control (MAC) address (on the
rear panel of unit) of the switch. Though helpful, the MAC address is not required
for opening a service call.
Print this page and record product information below. Keep the information in a
safe place for future reference. You will need this information when you register
the switch or open a service call with Lenovo.
Table 8.
Important product information
Product Name
Machine‐Type Model
Serial Number
Part Number
Media Access Control
(MAC) address for switch
MAC addresses for other
components
ThinkSystem NE1032T Rackswitch
8