Before Installing the NE2572O
Attention: Product information is required in order to register your NE2572O,
update its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the
NE2572O is installed. To prevent the need to remove the switch in order to read
required product information, locate and record the information shown on Table
prior to installation.
Figure
Figure 6. Sample product labels from the switch
Note: These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the front, rear, and/or bottom of the NE2572O contain
the Machine Type‐Model (MTM) number, serial number, part number of the switch.
These labels also include the Media Access Control (MAC) address (on the rear
panel of unit) of the switch. Though helpful, the MAC address is not required for
opening a service call.
Print this page and record product information below. Keep the information in a
safe place for future reference. You will need this information when you register the
switch or open a service call with Lenovo.
Table 5.
Product Name
Machine‐Type Model
Serial Number
Part Number
Media Access Control
(MAC) address for switch
MAC addresses for other
components
28
NE2572O Installation Guide
All manuals and user guides at all-guides.com
6 contains examples of product information labels.
Important product information
ThinkSystem NE2572O
5