Table of Contents
Advertisement
Before Installing the NE0152T
32
NE0152T Installation Guide
Attention: Product information is required in order to register your NE0152T,
update its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the NE0152T
is installed. To prevent the need to remove the switch in order to read required
product information, locate and record the information shown on
installation.
Figure 6
contains examples of product information labels.
Figure 6. Sample product labels from the switch
Note: These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the front, rear, and/or bottom of the NE0152T contain
the Machine Type-Model (MTM) number, serial number, part number of the switch.
These labels also include the Media Access Control (MAC) address (on the rear
panel of unit) of the switch. Though helpful, the MAC address is not required for
opening a service call.
Print this page and record product information below. Keep the information in a
safe place for future reference. You need this information when you register the
switch or open a service call with Lenovo.
Table 8.
Important product information
Product Name
Machine-Type Model
Serial Number
Part Number
Media Access Control
(MAC) address for switch
MAC addresses for other
components
ThinkSystem NE0152T
Table 8
prior to
Advertisement
Table of Contents
