Table of Contents
Advertisement
Boot Recovery Mode
88
NE1032T Installation Guide
The Boot Recovery Mode allows you to recover from a failed software or boot
image upgrade using TFTP or XModem download.
To enter Boot Recovery Mode you must select the Startup in recovery mode
option from the Boot Management Menu.
Entering Rescue Mode.
Please select one of the following options:
T) Configure networking and tftp download an image
X) Use xmodem 1K to serial download an image
P) Physical presence (low security mode)
F) Filesystem check
R) Reboot
E) Exit
Option? :
The Boot Recovery Mode menu allows you to perform the following actions:
To recover from a failed software or boot image upgrade using TFTP, enter T and
follow the screen prompts. For more details, see "Recover from a Failed Image
Upgrade using TFTP" on page
To recover from a failed software or boot image upgrade using XModem
download, enter X and follow the screen prompts. For more details, see
"Recovering from a Failed Image Upgrade using XModem Download" on
page
91.
To enable the loading of a special image, enter P and follow the screen prompts.
For more details, see "Physical Presence" on page
To check if the switch is ready to run Cloud NOS software, enter F. It performs a
check to see if the filesystem is optimally partitioned and updates it accordingly.
To restart the reload process from the beginning, enter R.
To exit Boot Recovery Mode menu, enter E.
89.
93.
Hide quick links:
Advertisement
Table of Contents
