Table of Contents
Advertisement
3. Secure the air‐duct mounting bracket to the rails with M6 screws. Torque the
4. Secure the air‐duct mounting bracket to the rack chassis with M3.5 screws. Torque
5. Plug the power cords into their respective NE1032T power connectors and using tie
52
NE1032T Installation Guide
screws to approximately 5.7 Nm ± 0.1 Nm (50 inch‐pounds).
Note: Reuse the original M6 screws used to fasten the 4‐post rack mounting
brackets to secure the air duct mounting brackets with 4‐post mounting brackets
together.
the screws to approximately 1.1 Nm ± 0.1 Nm (10 inch‐pounds).
wraps, secure the power cords to the mounting rails.
Power connection
Air duct mounting bracket
M3.5 screws
Power connection
Tie wraps
M6 screws
Tie wraps
Hide quick links:
Advertisement
Table of Contents
