Before Installing The Si4091 - Lenovo SI4091 Installation Manual

Before Installing the SI4091

© Copyright Lenovo 2016
Attention: Product information is required in order to register your SI4091, update
its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the SI4091
is installed. To prevent the need to remove the switch in order to read required
product information, locate and record the information shown on
page 16 prior to installation.
An example of the product information labels is shown as follows:
Figure 3. Sample product labels from the switch
Note: These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the SI4091 contain the serial number and part number
of the switch. These labels also include the Media Access Control (MAC) address
(on the uppermost handle) of the switch. Though helpful, the MAC address is not
required for opening a service call.
Chapter 2: Installing and Removing the SI4091
Table 1 on
15