7. After the switch reboots, return to the command prompt and verify that the VPD
information is correct using the following command:
© Copyright Lenovo 2017
NE1032T> display sys-info
*** display boot ***
Current ZTP State: Enable
Current FLASH software:
active image: version 10.4.2.0
standby image: version 10.4.2.0
Uboot: version 10.4.2.0
Currently set to boot software active image
Current port mode: default
Currently scheduled reboot time: none
...
System Name:
System Description:
System Model:
System Manufacture Date:
System Serial Number:
...
For more information about using the switch interface, see the Application Guide
and Command Reference for the NE1032T and its corresponding Lenovo Network
Operating System and firmware version.
NE1032T
NE1032T
LENOVO NE1032T
1304
XX01234567
Chapter 4: Removing and Replacing Components
77