Table of Contents
Advertisement
Before Installing the NE2552E
© Copyright Lenovo 2018
Attention: Product information is required in order to register your NE2552E,
update its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the
NE2552E is installed. To prevent the need to remove the switch in order to read
required product information, locate and record the information shown on Table 1
on page
16 prior to installation.
An example of the product information labels is shown as follows:
Figure 3. Sample product labels from the switch
Note: These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the NE2552E contain the serial number and part
number of the switch. These labels also include the Media Access Control (MAC)
address (on the uppermost handle) of the switch. Though helpful, the MAC
address is not required for opening a service call.
Chapter 2: Installing and Removing the NE2552E
15
Advertisement
Table of Contents
