3. From the front, slide the switch into the rack at the desired height.
4. Secure the switch to the front rack posts with M6 screws (Item 3) and either clip
nuts (Item 4) or cage nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1
Nm (50 inch‐pounds).
5. Slide the rear mounting brackets (Item 7 and Item 8) into the slots available on the
front mounting brackets.
© Copyright Lenovo 2017
3
10
7
8
Chapter 3: Installing NE1032T Hardware and Options
5
45